Electric Mini Pressure Washer 1300PSI Max | 1.27GPM

Electric Mini Pressure Washer 1300PSI Max | 1.27GPM

  • Power: 1450 w
  • Pressure: 1300 Psi
  • Rated Flow: 1.27 GPM
  • Max.Water Inlet Temperature: 104℉/40℃
  • Noise: Lower than 95 db(a)
  • Size: 27.5*23.5*39 cm
  • MOQ: 100pcs
  • Applications:For Homes, Cars, Boats, RVs, Driveways, Decks
Contact Us


1. Features:

1) This portable high pressure washer is a perfect combo of power and portability, also features a TSS (total stop system) which automatically shuts-off pump when the trigger is not engaged. 

2) The mini pressure washer cleaner is ideal for light and medium cleaning tasks, like homes, buildings, RVs, cars, trucks, boats, patios, lawn equipment and so on. 

3) And you can freely use this IPX5 waterproof high pressure cleaner without bothering about rain or water.



2. Pros & Cons



Ideal for light and medium cleaning tasks

Total Stop System

Lightweight and easy to use

IPX5 waterproof

Safety lock can avoid misoperation

Enough Long high-pressure hose, so you can clean a wider range

Doesn't powerful enough for commercial use.


3.Package Contents:

1) Electric Pressure Washer
2) Spray Gun
3) Extension Wand
4) 5 Meters High-Pressure Pipe
5) 5 Meters Power Cable
6) Cleaning Pin
7) Water Inlet Adaptor
8) Sprayer Gun Holder
9) Instruction


Always keep the water going when the machine is on – since your high pressure washer machine uses fresh water to cool down its engine, you shouldn’t keep water inside for too long, since the heated water won’t be suited for cooling any more. Every once in a while, even when you don’t use it, just spray the gun a few times to introduce new water to the unit. Or else, you should turn off the machine if you don’t need to use it any time soon.


5. FAQ:

Q: How do you purge air from a pressure washer?

A: First, turn the machine off and disconnect the high pressure hose from your power washer. Then make sure your garden hose connected onto the machine. Last, turn on your water source and allow water to run through the pump of the machine for 20 or 30 seconds.


Q: What causes pressure washer pump failure?

A: The two most important issues concerning breakdowns of pressure washer pump are cavitation and overheating due to excessive time in by-pass. Cavitation is caused when there is not enough water supplied to the pump.


Q: Why is my pressure washer pulsating?

A: Water flow may be restricted to the power pressure washer. Check that all hoses are free of kinks, leaks, or blockage. If the nozzle has even a little bit of dirt in the tip, it may cause enough obstruction for the pressure washer to pulsate. If your high pressure washer machine came with a nozzle cleaner, use it to clean the tip.


6.Contact Us:

Tel: +86 13736541406
E-mail: [email protected]



Add: No.1008 Qihang Road, Binhai Industry Zone, Jiaojiang, Taizhou, Zhejiang, China