Spray guns often appear faults and troubleshooting methods

Update:19-07-2019
Summary:

Under the country’s policy of vigorously supporting the […]

Under the country’s policy of vigorously supporting the three rural areas, China’s agriculture has followed the rapid development of its footsteps, and sprayers have alsoConstantly innovating, Hebei electric sprayer manufacturers rich machinery is proficient in sprayer sales and maintenance, todayTeach you some of the common problems and troubleshooting methods of sprayers.Insufficient spray pressure, poor atomization: If the water inlet ball valve is suspended by dirt, the inlet valve can be removed and used.The cloth removes dirt; if the cup is damaged, the new cup can be replaced; if the joint is not installed, or the dense

The seal ring is damaged and leaks, and the seal ring can be added or replaced.Spraying does not form fog: If the inclined hole of the nozzle body is blocked by dirt, the inclined hole can be dredged; if the nozzle hole is blockedDisassemble the cleaning nozzle hole, but do not use a hard object such as a wire or a copper needle to prevent the hole from expanding and making the sprayThe quality is deteriorated; if the filter in the casing is clogged or the ball of the water valve is suspended, the filter should be cleaned and the dirt that has been placed on the ball should be cleaned.The switch leaks or does not move: If the switch cap is not tightened, tighten the switch cap; if it is due to the switch core

If the gasket is worn, the gasket should be replaced; the switch can not be screwed because it is placed for a long time, or used for too long, the switch coreIf it is adhered due to the etch of the agent, the parts should be removed and cleaned in kerosene or diesel oil; if it is difficult to remove,Soak in kerosene for a period of time, then remove it and remove it. Do not hit with hard objects.Water leakage at each joint: If the joint is loose, tighten the nut; if the washer is not flat or damaged,The gasket should be flattened or the gasket replaced; if the gasket is hardened by shrinkage, it can be softened in animal oil before use.

https://www.tzhangyusj.com